Table of Contents
Advertisement
Section 400-Programming
Extension Name
Software Version: All Versions
Address: FF6 1# (ExtPort)# CONF (Name)#
Description
Names of up to 10 characters can be assigned to each extension number. An
extension's name appears on the second line of its display. The name of an
extension being called appears on the top line of the display.
Extension names can also be assigned without entering the programming
mode, using the Attendant Feature option (see Section 700-Feature
Operation for instructions).
Programming
To assign an extension name ...
To clear an extension name ...
Notes
Using a DSS Console With AFP. If the Attendant Feature Package (AFP) is
used (available only with CPC-B Version 2.0 to 4.0), the DSS console must
be initially set as type "11" in the Terminal Type address (FF3 ExtPort# 2#),
to enable the keys to perform programming functions.
DBS-2.3/9.2-400
Chapter 6. Name and Message Assignments (FF6)
FF6 1# (1-144)# CONF (NNNNNNNNNN)#
Extension Port
FF6 1# (1-144)# CONF ON/OFF
Extension Port
DBS Manual - Revised April 2000
Text Name
(up to 10 characters)
Page 6-3
Advertisement
Table of Contents
