Forced Account Codes - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

Forced Account Codes

Software Version: All Versions
Address: FF3 (ExtPort)# 5# (0-2)#
Description
Use this address to force extension users to enter an account code before
making an outside call.
• Beginning with CPC-AII/B Version 3.1, forced account codes will be
• Beginning with CPC-AII/B Version 6.0, forced account codes can be
Programming
Related Programming
Verified Forced Account Codes: FF1 2# 6# (1-100)# 1# (0000-9999)#
Toll Restriction for Verified Forced Account Codes: FF1 2# 6# (1-100)#
2# (0-7)#
TRS Types Assigned to Trunks or Extensions: FF7 addresses
Notes
Extensions Set to 0 ("Account code usage is voluntary"). The extension
user can place outside calls without entering an account code. If the caller
does enter an account code, the DBS will include it in the SMDR record for
the call, but will not verify it.
Extensions Set to 1 ("Account codes are forced and verified") (the
"verified" part of this option available in CPC-AII/B Version 3.1 or higher).
The extension user cannot place an outside call without first entering a valid
account code. The DBS will verify it (in CPC-AII/B Version 3.1 or higher)
and apply the account code's assigned TRS type to allow or disallow the call.
Extensions Set to 2 ("Account codes are forced but unverified") (this option
is available in CPC-AII/B Version 6.0 or higher). The extension user cannot
place an outside call without first entering an account code. The DBS will
include the account code in the SMDR record but will not verify it.
DBS-2.3/9.2-400
verified by the DBS system before allowing the call.
either "verified" or "unverified" by the system.
FF3 (1-144)# 5# (0-2)#
Extension Port
DBS Manual - Revised April 2000
Chapter 3. Extension Programming (FF3)
0=Account code usage is voluntary.
1=Account codes (4-digit) are forced and verified.
2=Account codes (1-10 digits) are forced but
unverified.
Page 3-9