Lcr Delete Tables - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

LCR Delete Tables

Software Version: All Versions
Address: FF8 7# (TrunkGrp)# (DeleteDigits)#
Description
Use this address to assign Delete Digits to calls routed to an LCR trunk group.
Up to 16 digits can be assigned.
When an outgoing call is routed to an LCR trunk group, the DBS will check
the first digits of the dialed number and, if it finds a matching entry in this
table, the DBS will not outpulse the matched digits (only the rest of the dialed
digits will be outpulsed).
This feature is often used to strip off the "1" before an area code, or "1+AC"
before a 7-digit phone number.
The deletion will occur only if the outgoing call is routed to a trunk group that
has Delete Digits assigned to it. The deletion is not relative to time-of-day or
the complete dialed number.
Programming
To create an LCR Delete Table ...
To clear an LCR Delete Table ...
Related Programming
LCR Trunk Groups: FF8 6# (TrunkGrp)# (Position)# (Trunk)#
Notes
Priority of Deleted Digits Over Added Digits. If digits are being added and
deleted from the same trunk group, the DBS will delete digits first, then add
digits.
DBS-2.3/9.2-400
FF8 7# (1-8)# (NNNNNNNNNNNNNNNN)#
LCR Trunk Group
FF8 7# (1-8)# CONF ON/OFF
LCR Trunk Group
DBS Manual - Revised April 2000
Chapter 8. Least Cost Routing (FF8)
Deletion Digits
(up to 16 digits)
Page 8-13