Panasonic DBS-2.3-400 Programming Manual page 117

Section 400-Programming
Assigning 9999 as Account Code 100 ...
To assign "9999" as Account Code 100, enter this address:
Related Programming
Toll Restriction For Verified Forced Account Codes: FF1 2# 6# (1-100)#
2# (0-7)#
Forced Account Codes: FF3 (ExtPort)# 5# (0 or 1)#
Toll Restriction Settings: FF7 addresses
Notes
Forced Unverified Account Codes. With CPC-AII and CPC-B versions
prior to 6.0, Unverified Account Codes can only be used on a voluntary basis
-- Forced Unverified is not available. However, beginning with Version 6.0,
Forced Unverified Account Codes can be used. See FF3 (ExtPort)# 5# (0-2)#
for more information.
TRS Interaction. The default TRS type for Verified Forced Account Codes
is "0," which generally allows intercom calling only. Therefore, if you assign
an account code but do not assign a TRS value to it, the Account Code will
restrict outside dialing.
Assignment Restriction. "0000" cannot be assigned as an Account Code.
SMDR Format. In the SMDR report, the Account Code that was used to
access the CO trunk will appear starting in position 70 of the call record line.
DBS-2.3/9.2-400
FF1 2# 6# 100# 1# 9999#
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
Page 1-73