Table of Contents
Advertisement
Chapter 8. Least Cost Routing (FF8)
Special LCR Area Codes
Software Version: All Versions
Address: FF8 3# (EntryNo.)# (AreaCode)#
Description
Use this address to assign up to four special area codes for LCR routing.
This address is used in conjunction with the next address -- "Special LCR
Office Codes" (FF8 4#) -- to assign different office codes within the same
area code to different Time Priority Route Tables.
If an area code is assigned here, the DBS will wait until the next three digits
(representing the office code) are dialed, before routing the call.
Programming
To assign a Special LCR Area Code ...
To clear a Special LCR Area Code ...
Related Programming
Time Priority Route Tables: FF8 5# (Table)# (Position)# (TrunkGrp)#
Special LCR Office Codes: FF8 4# (EntryNo.)# (Table)# (OfficeCode)#
(0 or 1)#
Notes
FLASH Key Interaction. Once a trunk is accessed through LCR, the
FLASH key cannot be used to get second dial tone. The flash operation is
disabled to prevent second calls from being placed over inappropriate routes.
Special Numbers Not Processed By LCR. If the user dials 0, 411, 555, 911,
or 800, the DBS will automatically terminate LCR processing and route the
call to pooled trunk group "9" (this trunk group is built in FF2 Trunk# 3#).
This occurs so that these numbers are dialed without modification (e.g.,
preventing LCR Add digits from being dialed as a prefix to the number).
Page 8-8
FF8 3# (1-4)# (000-999)#
Special Area Code Entry No.
FF8 3# (1-4)# CONF ON/OFF
Special Area Code Entry No.
DBS Manual - Revised April 2000
Section 400-Programming
Area Code
DBS-2.3/9.2-400
Advertisement
Table of Contents
