Table of Contents
Advertisement
Programming
n When monitoring from an outside line:
To answer a call, follow the operation for
your phone.
If you want to respond from the monitoring
handset, press #1 using tone dialing.
You can turn off the baby monitor feature
by pressing #0.
Note:
R 2 minutes after the monitored handset
starts a call, communication between the
monitored handset and monitoring
phone line is turned off automatically.
Other programming
Changing the handset name
Each handset can be given a customized
name ("Bob", "Kitchen", etc.). This is useful
when you make intercom calls between
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is "No". If you select
"Yes" without entering any handset name,
"Handset 1" to "Handset 6" is displayed.
1
MMenuN (right soft key) #104
2
Enter the desired name (max. 10
characters).
3
MSaveN
4
MbN: Select the desired setting. a
MSelectN 2 times a MOFFN
Calendar/Schedule
You can program 20 schedule alarms for each
handset using the calendar. A schedule alarm
sounds at the set time for 1 minute. A text
memo can also be displayed for the schedule
alarm.
Important:
R Make sure the unit's date and time setting
is correct (page 11).
30
PRS120C(en)_0121_ver110.pdf
Adding a new entry
1
2
3
4
5
6
7
8
Note:
R To stop the alarm, press MStopN or place
R When the handset is in use, the alarm will
Viewing entries
1
2
Editing an entry
1
2
3
4
5
30
MMenuN (right soft key) a
MSelectN
MbN: Select the desired date. a MSelectN
MMenuN a MbN: "Add new entry" a
MSelectN
Edit the date if necessary. a MOKN
Set the desired time. a MOKN
Enter a text memo (30 characters max.;
page 16). a MOKN
MbN: Select the desired alarm tone. a
MSelectN 2 times
R You can select "Off" if you prefer not
to hear an alarm tone.
R We recommend selecting a different
ringer tone from the one used for
outside calls.
MOFFN
the handset on the base unit or charger.
not sound until the handset is in standby
mode.
MMenuN (right soft key) a
MSelectN
To see the entries on the selected date,
press MSelectN.
To see the schedule list, press MListN.
R You can see detailed information
about the schedule by pressing
MMenuN. a MbN: "Detail" a
MSelectN
MMenuN (right soft key) a
MSelectN
MListN a MbN: Select the desired entry.
MMenuN a MbN: "Edit" a MSelectN
Edit the date if necessary. a MOKN
Edit the time if necessary. a MOKN
a
a
a
2014/01/29
14:56:58
Advertisement
Table of Contents
