Other Programming - Panasonic KX-PRS120 Operating Instructions Manual

Other programming

Changing the handset name
Each handset can be given a customized
name ("Bob", "Kitchen", etc.). This is useful
when you make intercom calls between
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is "No". If you select
"Yes" without entering any handset name,
"Handset 1" to "Handset 6" is displayed.
1
MMenuN (right soft key) #104
2
Enter the desired name (max. 10
characters).
3
MSaveN
4
MbN: Select the desired setting. a
MSelectN 2 times a MOFFN
Calendar/Schedule
You can program 20 schedule alarms for each
handset using the calendar. A schedule alarm
sounds at the set time for 1 minute. A text
memo can also be displayed for the schedule
alarm.
Important:
R Make sure the unit's date and time setting
is correct (page 12).
Adding a new entry
1
MMenuN (right soft key) a
MSelectN
2
MbN: Select the desired date. a MSelectN
3
MMenuN a MbN: "Add new entry" a
MSelectN
4
Edit the date if necessary. a MOKN
5
Set the desired time. a MOKN
6
Enter a text memo (30 characters max.;
page 17). a MOKN
7
MbN: Select the desired alarm tone. a
MSelectN 2 times
R You can select "Off" if you prefer not
to hear an alarm tone.
For assistance, please visit http://www.panasonic.com/help
PRS120(en)_0122_ver110.pdf
8
Note:
R To stop the alarm, press MStopN or place
R When the handset is in use, the alarm will
Viewing entries
1
2
Editing an entry
1
2
3
4
5
6
a
7
Erasing an entry
Schedule alarm entries are not erased
automatically after the schedule alarm sounds.
Erase unwanted entries.
1
2
3
4
31
Programming
R We recommend selecting a different
ringer tone from the one used for
outside calls.
MOFFN
the handset on the base unit or charger.
not sound until the handset is in standby
mode.
MMenuN (right soft key) a
MSelectN
To see the entries on the selected date,
press MSelectN.
To see the schedule list, press MListN.
R You can see detailed information
about the schedule by pressing
MMenuN. a MbN: "Detail" a
MSelectN
MMenuN (right soft key) a
MSelectN
MListN a MbN: Select the desired entry.
MMenuN a MbN: "Edit" a MSelectN
Edit the date if necessary. a MOKN
Edit the time if necessary. a MOKN
Edit the text memo if necessary (30
characters max.). a MOKN
MbN: Select the desired alarm tone. a
MSelectN 2 times a MOFFN
MMenuN (right soft key) a
MSelectN
MListN a MbN: Select the desired entry.
MMenuN a MbN: "Erase" a MSelectN
MbN: "Yes" a MSelectN a MOFFN
a
a
a
31
2014/01/22 10:09:31