Table of Contents
Advertisement
Section 700 - Operation
10. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-Display Phone on page 95.
• See Example 2. Small-Display Phone on page 96.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
11. Repeat steps 9-10 as many times as necessary to enter the
desired SSD name.
Note: Press the FL/R key to clear the entire entry.
12. Press the HOLD key to store the entry.
13. To set additional SSD index names, press the volume up or
down key or press the HOLD key to move to the desired
SSD.
14. Repeat steps 9-13 until all SSD indexes are entered.
15. Press the MEMORY key to exit the entry mode.
16. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
•
N/A
Considerations
•
N/A
Set System Speed Dial Names
Description
For a description of System Speed Dial (SSD), see "System Speed Dial" on page 189 for a Digital
Key Telephone, "System Speed Dial" on page 252 for a Digital Single Line Telephone (DSLT), and
"System Speed Dial" on page 296 for a Single Line Telephone (SLT).
Operation
S-ICX-64-700
Action
S-ICX (International) issued April 2002
Chapter 4. User Maintenance
Result
Next SSD index number displays
Desired SSD index number displays
Enter SSD # displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
109
Advertisement
Table of Contents
