6] Feature; 6-1] System Speed Dial - Panasonic KX-TDA50 Pc Programming Manual

2.13 [6] Feature

2.13.1 [6-1] System Speed Dial

The System Speed Dialing Table is used to store frequently dialed numbers as well as callers who
should be automatically routed to certain extensions when they call (Calling Line Identification [CLI]
distribution). The System Speed Dialing Table is available for all extension users when making or
receiving a call.
A maximum of 1000 System Speed Dialing numbers (e.g., telephone numbers, feature numbers) can
be programmed with other related parameters. 100 numbers are displayed at a time. To display other
sets of numbers, click the applicable tab.
Memory
Selects the System Speed Dialing Table to be programmed. Whether a tenant uses the basic System
Speed Dialing Table or the additional table (with MEC [KX-TDA50/KX-TDA100/KX-TDA200] or EMEC
[KX-TDA600] card) depends on the setting of System Speed Dial in 2.13.6 [6-6] Tenant.
Default
Basic Memory
Value Range
For KX-TDA50:
Basic Memory: the standard table
Expanded Memory: additional table (only available when an MEC card is installed to the PBX)
For KX-TDA100/KX-TDA200:
Basic Memory: the standard table
Expanded Memory for Tenant 1–8: additional tables (only available when an MEC card is installed to
the PBX)
For KX-TDA600:
Basic Memory: the standard table
Expanded Memory for Tenant 1–32: additional tables (only available when an EMEC card is installed
to the PBX)
Maintenance Console Location
2.13.1 [6-1] System Speed Dial
Programming Manual References
2.13.6 [6-6] Tenant—System Speed Dial
Feature Manual References
1.16.4 Speed Dialing, System
1.17.3 Tenant Service
Name
Specifies a name for the System Speed Dialing number.
2.13 [6] Feature
PC Programming Manual 599