D-Link xStack DGS-3420 Series Reference Manual page 1115

Layer 2 managed stackable gigabit switch cli
Hide thumbs Also See for xStack DGS-3420 Series:
Table of Contents

Advertisement

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
To assign 802.1p default priority by RADIUS Server, the proper parameters should be configured on
the RADIUS Server. The tables below show the parameters for 802.1p default priority.
The parameters of the Vendor-Specific attributes are:
Vendor-Specific Attribute Description
Vendor-ID
Vendor-Type
Attribute-Specific Field
If the user has configured the 802.1p priority attribute of the RADIUS server (for example, priority 7)
and the 802.1X, or MAC based authentication is successful, the device will assign the 802.1p default
priority (according to the RADIUS server) to the port. However, if the user does not configure the
priority attribute and authenticates successfully, the device will not assign a priority to this port. If the
priority attribute is configured on the RADIUS server is a value out of range (>7), it will not be set to
the device.
To assign VLAN by RADIUS Server, the proper parameters should be configured on the RADIUS
Server. To use VLAN assignment, RFC3580 defines the following tunnel attributes in RADIUS packets.
The table below shows the parameters for a VLAN:
RADIUS Tunnel Attribute
Tunnel-Type
Tunnel-Medium-Type
Tunnel-Private-Group-ID
A summary of the Tunnel-Private-Group-ID Attribute format is shown below.
0
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
Type
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Defines the vendor.
Defines the attribute.
Used to assign the 802.1p
default priority of the port.
Description
This attribute indicates the
tunneling protocol(s) to be
used (in the case of a tunnel
initiator) or the tunneling
protocol in use (in the case of
a tunnel terminatior).
This attribute indicates the
transport medium being used.
This attribute indicates group
ID for a particular tunneled
session.
1
|
Length
|
Value
171 (DLINK)
4
0-7
Value
13 (VLAN)
6 (802)
A string (VID)
2
Tag
|
String...
1110
Usage
Required
Required
Required
Usage
Required
Required
Required
3

Advertisement

Table of Contents
loading

Table of Contents