D-Link xStack DGS-3420 Series Reference Manual page 1117

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Attribute-Specific Field
If the user has configured the ACL attribute of the RADIUS server (for example, ACL profile: create
access_profile ethernet vlan 0xFFF profile_id 100; ACL rule: config access_profile profile_id 100
add access_id auto_assign ethernet), and the 802.1X, MAC-based Access Control, WAC, or JWAC
authentications are successful, the device will assign the ACL profiles and rules according to the
RADIUS server. For more information about the ACL module, please refer to the 'Access Control List
(ACL) Commands' section.
Used to assign the ACL profile
or rule.
1112
ACL Command Required
For example:
ACL profile: create
access_profile
ethernet vlan 0xFFF
profile_id 100;
ACL rule: config
access_profile
profile_id 100 add
access_id
auto_assign ethernet
vlan_id default port all
deny;