Subscribe-To-Alert-Group All - Cisco Catalyst 4500 Series Command Reference Manual

subscribe-to-alert-group all

subscribe-to-alert-group all
To subscribe to all available alert groups, use the subscribe-to-alert-group all command.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes cfg-call-home-profile
Command History Release
12.2(52)SG
Usage Guidelines
To enter profile call-home configuration submode, use the profile command in call-home configuration
mode.
Examples This example shows how to subscribe to all available alert groups:
Switch(config)# call-home
Switch(cfg-call-home)# profile cisco
Switch(cfg-call-home-profile)# subscribe-to-alert-group all
Related Commands Command
destination address
destination message-size-limit bytes
destination preferred-msg-format
destination transport-method
profile
subscribe-to-alert-group configuration
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-1024
subscribe-to-alert-group all
Modification
Support was introduced on the Catalyst 4500 series switches.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Configures the destination e-mail address or URL to which
Call Home messages will be sent.
Configures a maximum destination message size for the
destination profile.
Configures a preferred message format.
Enables the message transport method.
Enters profile call-home configuration submode
Subscribes this destination profile to the Configuration
alert group.
Subscribes this destination profile to the Diagnostic alert
group.
Subscribes this destination profile to the Environment alert
group.
OL-27596 -01