Advertisement
MX150 3D Universal Edge Router Hardware Guide
Table 22: Optical Interface Support for Gigabit Ethernet SFP+ Transceivers in MX150
Devices (continued)
Ethernet Standard
Specification
10GBASE-ZR
Model number
Rate
Connector type
Fiber count
Transmitter wavelength
Minimum launch power
Maximum launch power
Minimum receiver sensitivity
Maximum input power
Fiber type
Core/Cladding size
Modal bandwidth
Distance
DOM support
Software required
Support for Virtual Chassis
configuration
Related
Documentation
SFP+ Direct Attach Copper Cables for MX150
62
Front Panel of an MX150 on page 5
Installing a Transceiver in an MX150 on page 103
Removing a Transceiver from an MX150 on page 101
Small form-factor pluggable plus transceiver (SFP+) direct attach copper (DAC) cables,
also known as Twinax cables, are suitable for in-rack connections between servers and
switches. They are suitable for short distances of up to 23 ft, making them ideal for highly
cost-effective networking connectivity within a rack and between adjacent racks.
Value
EX-SFP-10GE-ZR
10 Gbps
LC
Dual
1550 nm
0 dBm
5 dBm
–20 dBm
–8 dBm
SMF
9/125 µm
–
80 km
Available
Junos OS Release 17.3R1 or later
Yes
Copyright © 2017, Juniper Networks, Inc.
Advertisement
Chapters
