Mx10003 Ac Power Supply Module Leds - Juniper MX10003 Hardware Manual

Each AC power supply weighs approximately 3.4 lb (1.54 kg) and consists of a handle, an ejector lever, an
AC appliance inlet, a fan, and an LED to monitor the status of the power supply.
shows the power supply.
Each inlet requires a dedicated AC power feed and a dedicated customer-site circuit breaker. We recommend
that you use a minimum 15-A (110 VAC) customer-site circuit breaker, or as required by local code.
WARNING:
location. It has a separate protective earthing terminal (sized for M4 hex screws)
provided on the chassis in addition to the grounding pin of the power supply cord. This
separate protective earthing terminal must be permanently connected to earth.
Figure 10: AC Power Supply

MX10003 AC Power Supply Module LEDs

Figure 11 on page 37 shows the AC power supplies components along with the status LED.
The router is a pluggable type A equipment installed in a restricted-access
Figure 10 on page 36
36