Power Cable Warning (Japanese); Contacting Juniper Networks - Juniper QFX5100-24Q Quick Start Manual

Hide thumbs Also See for QFX5100-24Q:

Before installing or after removing an electrical component, always place it component-side up on a flat antistatic mat

or in an antistatic bag.

Do not work on the switch or connect or disconnect cables during electrical storms.

Before working on equipment that is connected to power lines, remove jewelry, including rings, necklaces, and watches.

Metal objects heat up when connected to power and ground and can cause serious burns or become welded to the

terminals.

CAUTION:

transceiver. Damage to the access ports will occur.

Power Cable Warning (Japanese)

The attached power cable is only for this product. Do not use this cable for another product.

For technical support, see:

http://www.juniper.net/support/requesting-support.html

Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in the

United States and other countries. All other trademarks, service marks, registered marks, or registered service marks are the

property of their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper

Do not place a copper transceiver in an access port directly above or below another copper

Table of Contents