Show Session - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

show session

show session {{detail} {<sessID>}} {history}
Description
Displays the currently active Telnet and console sessions communicating with the switch.
Syntax Description
detail
sessID
history
Default
N/A.
Usage Guidelines
The command displays the username and IP address of the incoming Telnet session,
show session
whether a console session is currently active, and the login time. Each session is numbered.
Beginning with ExtremeWare XOS 11.2, the switch accepts IPv6 connections. If the incoming session is
from an IPv6 address, the
You can specify the following options to alter the session output:
—The output for all current sessions is displayed in a list format.
●
detail
—The output for the specified session is displayed in a list format.
●
sessID
—Displays a list of current and previous sessions, including the user, type of session,
●
history
location, and start and end time of the session.
The command fields are defined in
show session
Table 12: Show command field definitions
Field
#
Login Time
User
Type
Auth
CLI Auth
Location
ExtremeWare XOS 11.5 Command Reference Guide
Specifies more detailed session information.
Specifies a session ID number.
Displays a list of all sessions.
output indicates IPv6.
show session
Definition
Indicates session number.
Indicates login time of session.
Indicates the user logged in for each session.
Indicates the type of session, for example: console, telnet, http, https.
Indicates how the user is logged in.
Indicates the type of authentication (RADIUS and TACAS) if enabled.
Indicates the location (IP address) from which the user logged in. The output also
indicates if the location is an IPv6 address.
Table 12.
show session
209