Configure Lldp Reinitialize-Delay - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure lldp reinitialize-delay

configure lldp reinitialize-delay <seconds>
Description
Configures the delay before the receive state machine is reinstalled once the LLDP transmit mode has
been disabled.
Syntax Description
seconds
Default
2 seconds.
Usage Guidelines
N/A.
Example
The following command configures a reinitialization delay of 10 seconds:
configure lldp reinitialize-delay 10
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.5 Command Reference Guide
Specifies the delay that applies to the reinitialization attempt. The range is 1
to 10 seconds.
configure lldp reinitialize-delay
487