Configure Lldp Ports Vendor-Specific Dot1 Port-Vlan-Id - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Configuring LLDP

configure lldp ports vendor-specific dot1 port-vlan-ID

configure lldp ports [all | <port_list>] [advertise | no-advertise] vendor-
specific dot1 port-vlan-ID
Description
Configures the LLDP port to advertise or not advertise port vlan ID information to its neighbors. This
allows a VLAN bridge port to advertise the port VLAN identifier that is associated with untagged or
priority-tagged frames.
Syntax Description
all
port_list
advertise
no-advertise
Default
No advertise.
Usage Guidelines
The port VLAN ID TLV allows the port to transmit the VLAN ID associated with untagged VLANs.
There can be only one port VLAN ID in each LLPDU.
If no untagged VLANs are configured on the specified port, the TLV is not added to the LLPDU, even if
you configured this to advertise.
Example
The following command configures all ports to advertise port vlan ID information to neighbors:
configure lldp ports all advertise vendor-specific dot1 port-vlan-ID
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
468
Specifies all ports on the switch.
Specifies one or more ports or slots and ports.
Specifies to send the information to neighbors.
Specifies not to send the information to neighbors.
ExtremeWare XOS 11.5 Command Reference Guide