Show Log Components - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Status Monitoring and Statistics

show log components

show log components {<event component>} {version}
Description
Displays the name, description and default severity for all components.
Syntax Description
event component
version
Default
N/A.
Usage Guidelines
This command displays the name, description, and default severity defined for the specified
components or subcomponents.
Depending on the software version running on your switch or your switch model, additional or
different component information might be displayed.
Example
The following command displays the log components:
show log components
The following is sample output from this command:
Severity
Component
------------------- ---------------------------------------------- -------------
AAA
RADIUS
TACACS
ACL
CLEARFlow
Policy
bgp
damp
event
inUpdt
keepalive
misc
msgs
outUpdt
672
Specifies the component to display.
Specifies the version number of the component.
Title
Authentication, Authorization, Accounting
Remote Authentication Dial In User Service
Terminal Access Controller Access Control Syst Info
ACL
CLEARFlow
Policy actions
Border Gateway Protocol
BGP Route Flap Dampening related debug message Error
BGP FSM related events
Incoming Update related debug msgs
BGP keepalive message
Miscellenous debug (Import, Aggregate, NextHop Warning
Debug for BGP messages (OPEN, Update, Notifica Warning
Transmit Update related debug
Threshold
Info
Error
Info
Info
Info
Info
Error
Warning
Warning
Warning
ExtremeWare XOS 11.5 Command Reference Guide