Configure Account Password-Policy History - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5
Hide thumbs Also See for ExtremeWare XOS:
Table of Contents

Advertisement

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure account password-policy history

configure account [all | <name>] password-policy history [<num_passwords> |
none]
Description
Configures the switch to verify the specified number of previous passwords for the account. The user is
prevented from changing the password on a user or administrative account to any of these previously
saved passwords.
Syntax Description
all
name
num_passwords
none
Default
N/A.
Usage Guidelines
Use this command to instruct the system to verify new passwords against a list of all previously used
passwords, once an account successfully changes a password. The limit is the number of previous
passwords that the system checks against in the record to verify the new password.
If this parameter is configured, the system returns an error message if a user attempts to change the
password to one that is saved by the system (up to the configured limit) for that account; this applies to
both user and administrative accounts. This also applies to a configured password on the default admin
account on the switch.
The limit of previous passwords that the system checks for previous use is configurable from 1 to 10.
Using the
option disables previous password tracking and returns the system to the default state
none
of no record of previous passwords.
Example
The following command instructs the system to verify that the new password has not been used as a
password in the previous 5 passwords for the account engineering:
configure account engineering password-policy history 5
History
This command was first available in ExtremeWare XOS 11.2.
ExtremeWare XOS 11.5 Command Reference Guide
Specifies all accounts (and future users).
Specifies an account name.
Specifies the number of previous passwords the system verifies for each
account. The range is 1 to 10 passwords.
Resets the system to not remember any previous passwords.
configure account password-policy history
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware xos 11.5

Table of Contents