Disable Log Display - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

disable log display

disable log display
disable log display
Description
Disables the sending of messages to the console display.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
If the log display is disabled, log information is no longer written to the serial console.
This command setting is saved to FLASH and determines the initial setting of the console display at
boot up.
You can also use the following command to control logging to different targets:
disable log display
The command is equivalent to
disable log display disable log target console-display
command.
Example
The following command disables the log display:
disable log display
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
631
ExtremeWare XOS 11.5 Command Reference Guide