Extreme Networks ExtremeWare XOS Command Reference Manual page 393

Software version 11.5
Hide thumbs Also See for ExtremeWare XOS:
Table of Contents

Advertisement

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
If you do not specify a port number or range of ports, detailed system-related information is displayed
for all ports. The data is displayed in a table format.
This status information may be useful for your technical support representative if you have a network
problem.
The
parameter is used to provided more specific port information. The data is called out with
detail
written explanations versus displayed in a table format.
NOTE
The keyword detail displays slightly different information depending on the platform and configuration you are
working with.
The link filter counter displayed with the
an event. The link filter up indicates the number of link transitions from down to up at the middle layer
filter.
Example
The following command displays port system-related information on a BlackDiamond 8810 switch:
show port 3:1 information
Following is sample output from this command:
BD8810.4 > show port 3:1 info
Port
Flags
=============================================================================
3:1
Em------e--
==============================================================================
Flags : a - Load Sharing Algorithm address-based, D - Port Disabled,
e - Extreme Discovery Protocol Enabled, E - Port Enabled,
g - Egress TOS Enabled, j - Jumbo Frame Enabled,
l - Load Sharing Enabled, m - MACLearning Enabled,
n - Ingress TOS Enabled, o - Dot1p Replacement Enabled,
P - Software redundant port(Primary),
R - Software redundant (Redundant),
q - Background QOS Monitoring Enabled,
s - diffserv Replacement Enabled,
v - Vman Enabled, f - Unicast Flooding Enabled
M - Multicast Flooding Enabled, B - Broadcast Flooding Enabled
L - Extreme Link Status Monitoring Enabled
NOTE
The BlackDiamond 10808 series and 12804 switches have an additional flag: p - Load Sharing Algorithm
port-based.
ExtremeWare XOS 11.5 Command Reference Guide
keyword is calculated at the middle layer on receiving
detail
Link
Link Num Num
State ELSM UPS
STP VLAN Proto
ready
-
0
0
Num
Jumbo QOS
Size
profile Master
1
1
9216
show ports information
Load
393

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware xos 11.5

Table of Contents