Configure Radius-Accounting Timeout - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Security Commands

configure radius-accounting timeout

configure radius-accounting {mgmt-access | netlogin} timeout <seconds>
Description
Configures the timeout interval for RADIUS-Accounting authentication requests.
Syntax Description
mgmt-access
netlogin
seconds
Default
The default is 3 seconds.
Usage Guidelines
This command configures the timeout interval for RADIUS-Accounting authentication requests. When
the timeout has expired, another authentication attempt will be made. After three failed attempts to
authenticate, the alternate server will be used.
The
mgmt-access
The
netlogin
If you do not specify the
switch management and netlogin RADIUS accounting servers.
Example
This example configures the timeout interval for RADIUS-Accounting authentication to 10 seconds.
After 30 seconds (three attempts), the alternate RADIUS server will be used:
configure radius-accounting timeout 10
History
This command was first available in ExtremeWare XOS 10.1.
The
mgmt-access
Platform Availability
This command is available on all platforms.
968
Specifies the switch management RADIUS accounting server.
Specifies the network login RADIUS accounting server.
Specifies the number of seconds for accounting requests. Range is 3 to 120
seconds.
keyword specifies the RADIUS accounting server used for switch management.
keyword specifies the RADIUS accounting server used for network login.
or
mgmt-access
and keywords were added in ExtremeWare XOS 11.2.
netlogin
keywords, the timeout interval applies to both
netlogin
ExtremeWare XOS 11.5 Command Reference Guide