Extreme Networks ExtremeWare XOS Command Reference Manual page 681

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Example
The following command displays the log configuration:
show log configuration target
The following is sample output from this command:
Log Target : memory-buffer
Enabled ? : yes
Filter Name : DefaultFilter
Match regex : Any
Severity : Debug-Data (through Critical)
Format : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condit
ion>
Buffer size : 1000 messages
Log Target : nvram
Enabled ? : yes
Filter Name : DefaultFilter
Match regex : Any
Severity : Warning (through Critical)
Format : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condit
ion>
Log Target : console
Enabled ? : no
Filter Name : DefaultFilter
Match regex : Any
Severity : Info (through Critical)
Format : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condit
ion>
Log Target : primary-msm
Enabled : yes
Filter Name : DefaultFilter
Match regex : Any
Severity : Error (through Critical)
Log Target : backup-msm
Enabled : yes
Filter Name : DefaultFilter
Match regex : Any
Severity : Error (through Critical)
History
This command was first available in ExtremeWare XOS 10.1.
The and
primary-msm backup-msm
The parameter was first available in ExtremeWare XOS 11.0.
ipPort
The
local0 ... local7
ExtremeWare XOS 11.5 Command Reference Guide
options were first available in ExtremeWare XOS 11.0.
keywords were made optional in ExtremeWare XOS 11.4.
show log configuration target
681