Extreme Networks ExtremeWare XOS Command Reference Manual page 604

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Status Monitoring and Statistics
SysContact:
System MAC:
SysHealth check:
Recovery Mode:
System Watchdog:
If you use the
configure sys-recovery-level slot
would appear next to
(Strict)
Example
On the BlackDiamond 8800 series switch, the following command configures the switch to forward
faults to be handled by the level set by the
configure sys-health-check all level strict
On the Summit X450 family of switches, the following command configures the switch to forward faults
to be handled by the level set by the
configure sys-health-check all level strict
History
This command was first available in ExtremeWare XOS 11.5.
Platform Availability
This command is available only on the BlackDiamond 8800 series and the Summit X450 family of
switches.
604
support@extremenetworks.com, +1 888 257 3000
00:04:96:1F:A2:60
Enabled (Normal)
None
Enabled
parameter, which configures the switch to take the action configured by the
strict
Enabled
configure sys-recovery-level switch
or the
configure sys-recovery-level switch
.
configure sys-recovery-level slot
ExtremeWare XOS 11.5 Command Reference Guide
command,
command:
command: