Show Session - Extreme Networks ExtremeWare XOS Command Reference Manual

show session

show session {{detail} {<sessID>}} {history}
Description
Displays the currently active Telnet and console sessions communicating with the switch.
Syntax Description
detail
sessID
history
Default
N/A.
Usage Guidelines
The
show session
whether a console session is currently active, and the login time. Each session is numbered.
You can specify the following options to alter the session output:
• —The output for all current sessions is displayed in a list format.
detail
• —The output for the specified session is displayed in a list format.
sessID
• —Displays a list of current and previous sessions, including the user, type of session,
history
location, and start and end time of the session.
The
show session
Table 8: Show command field definitions
Field
#
Login Time
User
Type
Auth
CLI Auth
Location
Example
The following command displays the active sessions on the switch:
show session
ExtremeWare XOS 11.0 Command Reference Guide
Specifies more detailed session information.
Specifies a session ID number.
Displays a list of all sessions.
command displays the username and IP address of the incoming Telnet session,
command fields are defined in Table 8.
Definition
Indicates session number.
Indicates login time of session.
Indicates the user logged in for each session.
Indicates the type of session.
Indicates how the user is logged in.
Indicates the type of authentication (RADIUS and TACAS) if enabled.
Indicates the location (IP address) from which the user logged in.
show session
147