Extreme Networks ExtremeWare XOS Command Reference Manual page 269

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
software upgrade, enter
restart process
processes.
To display the status of ExtremeWare XOS processes on the switch, including how many times a process
has been restarted, use the
command. The following is a truncated sample of the show process command on the Summit X450
series switch:
Process Name Version
-------------------------------------------------------------------------
aaa 3.0.0.2
acl 3.0.0.2
bgp Not Started 0
cfgmgr 3.0.0.21
cli 3.0.0.22
devmgr 3.0.0.2
dirser 3.0.0.2
dosprotect 3.0.0.1
eaps 3.0.0.8
...
You can also use the
restart process
more information, see the section
Upgrade and Boot Options,"
Example
The following command stops and restarts the process tftpd during a software upgrade:
restart process tftpd
The following command stops and restarts all instances of the OSPF routing protocol for all VRs during
a software upgrade:
restart process class ospf
History
This command was first available in ExtremeWare XOS 11.3.
Support for the Border Gateway Protocol (bgp) was added in ExtremeWare XOS 11.4.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.5 Command Reference Guide
followed by [Tab]. The switch displays a list of available
show process {<name>} {detail} {description} {slot <slotid>}
Restart State
0 Ready
0 Ready
No license
0 Ready
0 Ready
0 Ready
0 Ready
0 Ready
0 Ready
command when upgrading a software modular package. For
"Upgrading a Modular Software Package"
of the ExtremeWare XOS Concepts Guide.
Start Time
Thu Sep 1 17:00:52 2005
Thu Sep 1 17:00:54 2005
Not Started
Thu Sep 1 17:00:52 2005
Thu Sep 1 17:00:52 2005
Thu Sep 1 17:00:52 2005
Thu Sep 1 17:00:51 2005
Thu Sep 1 17:00:56 2005
Thu Sep 1 17:00:53 2005
in Appendix A, "Software
restart process
269