Configure Bvlan Add Ports Tagged - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure bvlan add ports tagged

configure bvlan <blvan-name> add ports <port_list> tagged

Adds ports to the specified BVLAN.

Syntax Description

Enter the name of the BVLAN to which you are adding ports.

Usage Guidelines

Only tagged ports can be added to the BVLAN.

You cannot configure Connectivity Fault Management (CFM) on ports added to the BVLAN, or apply

ACLs to those ports.

The following command assigns the ports 1:1 to 1:5 to the backbone VLAN (BVLAN) black and tags

those ports:

configure bvlan black add ports 5:1-5 tagged

This command was first available in ExtremeWare XOS 11.4.

Platform Availability

This command is available only on the BlackDiamond 10808 and 12804 switch.

ExtremeWare XOS 11.5 Command Reference Guide

Extremeware xos 11.5