Extreme Networks ExtremeWare XOS Command Reference Manual page 633

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Configuration changes to the
telnet session, and are not saved in FLASH. Changes to the other targets are saved to FLASH.
You can also use the following command to disable displaying the log on the console:
disable log display
The
disable log display
command.
Modular Switches Only. Note that the
target is only active on the backup MSM.
primary-msm
Example
The following command disables log messages to the current session:
disable log target session
History
This command was first available in ExtremeWare XOS 10.1.
The and
primary-msm backup-msm
The parameter was first available in ExtremeWare XOS 11.0.
ipPort
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.5 Command Reference Guide
target are in effect only for the duration of the console display or
session
command is equivalent to
target is only active on the primary MSM, and the
backup-msm
options were first available in ExtremeWare XOS 11.0.
disable log target console-display
disable log target
633