Show Slot - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

show slot

show slot {<slot> {detail} | detail }
Description
Displays the slot-specific information.
Syntax Description
slot
detail
Default
N/A.
Usage Guidelines
NOTE
You may see slightly information displayed depending on the platform and configuration you are using.
The command displays the following information:
show slot
The slot number
●
The type of module installed in the slot
●
The type that the module is configured as
●
The state of the module, whether the power is down, if the module is operational, if a diagnostic
●
being run, if there is a mismatch between the slot configuration and the module in the slot
The number of ports on the module
●
If you do not specify a slot number, information for all slots is displayed.
The display also includes a notice of insufficient power, should that arise.
The command displays the following states, among others:
show slot
Empty (BD 8800 series switch only—This also displays if you have a module in the chassis that is
●
unsupported by the current software you are running.)
Down
●
Power ON
●
Powered OFF
●
Booting
●
Initializing
●
VLAN sync
●
ExtremeWare XOS 11.5 Command Reference Guide
Specifies a slot on a modular switch.
Specifies detailed port information.
show slot
407