Extreme Networks ExtremeWare XOS Command Reference Manual page 408

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Configuring Slots and Ports on a Switch
FDB sync
●
ACL sync
●
RT sync
●
Operational
●
Example
You see slightly different displays, depending on the platform.
BlackDiamond 8800 series switch only. The following example displays module information for all slots:
Slots Type
-------------------------------------------------------------------------------
Slot-1
Slot-2 G24X
Slot-3
Slot-4
Slot-5 G8X
Slot-6
Slot-7
Slot-8 G48P
Slot-9 10G4X
Slot-10
MSM-A MSM-G8X
MSM-B
Flags : M - Backplane link to Master MSM is Active
B - Backplane link to Backup MSM is also Active
D - Slot Disabled, S - Slot Secured
I - Insufficient Power (refer to "show power budget")
The following example displays module information for a specified slot on the BlackDiamond 8810
switch:
BD-8810.3 # show slot 2
Slot-2 information:
State:
Download %:
Flags:
Serial number:
Hw Module Type:
SW Version:
SW Build:
Configured Type:
Ports available:
Flags : M - Backplane link to Master MSM is Active
B - Backplane link to Backup MSM is also Active
D - Slot Disabled, S - Slot Secured
I - Insufficient Power (refer to "show power budget")
408
Configured
G24X
G8X
G48P
10G4X
Operational
100
M S
800115-00-02 04314-00006
G24X
11.1.0.0
v11100 by Wed Oct 20 16:01:52 PDT 2004
G24X
24
State Ports Flags
Empty 0
Operational 24 M
Empty 0
Empty 0
Operational 8 M
Empty 0
Empty 48
Operational 48 M
Powered OFF 4
Empty 0
Operational 0
Empty 0
ExtremeWare XOS 11.5 Command Reference Guide
S
S
S
SI
S