Enable Cpu-Monitoring - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

enable cpu-monitoring

enable cpu-monitoring {interval <seconds>} {threshold <percent>}
Description
Enables CPU monitoring on the switch.
Command Syntax
seconds
threshold
Default
CPU monitoring is enabled and occurs every 20 seconds. The default CPU threshold value is 60%.
Usage Guidelines
CPU monitoring allows you to monitor the CPU utilization and history for all of the processes running
on the switch. By viewing this history on a regular basis, you can see trends emerging and identify
processes with peak utilization. Monitoring the workload of the CPU allows you to troubleshoot and
identify suspect processes before they become a problem.
To specify the frequency of CPU monitoring, use the
recommends the default setting for most network environments. If you enter a number lower than 20
seconds, CPU utilization may increase.
CPU usage is measured in percentages. By default, the CPU threshold value is 60%. If CPU utilization
of a process exceeds 60% of the regular operating basis, the switch logs an error message specifying the
process name and the current CPU utilization for the process. In addition, if configured with the
guidance of Extreme Networks Customer Support, the switch can save this information in a coredump
or tracefile. To modify the CPU threshold level, use the
Example
The following command enables CPU monitoring every 30 seconds:
enable cpu-monitoring interval 30
History
This command was first available in an ExtremeWare XOS 11.2.
ExtremeWare XOS 11.5 Command Reference Guide
Specifies the monitoring interval, in seconds. The default is 20 seconds, and
the range is 5 to 60 seconds.
Specifies the CPU threshold value. CPU usage is measured in percentages. The
default is 60%, and the range is 0% to 100%.
interval
threshold
enable cpu-monitoring
keyword. Extreme Networks
keyword. The range is 0% to 100%.
259