Show Lldp - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Configuring LLDP

show lldp

show lldp {port [all | <port_list>]} {detailed}
Description
Displays LLDP configuration information for the specified port or ports. Use the
display the configured VLANs on the port and the enabled VLAN-specific TLVs.
Syntax Description
all
port_list
detailed
Default
N/A.
Usage Guidelines
Use the detailed variable to display information regarding configured VLANs on the ports and any
enabled VLAN-specific TLVs.
Example
The following example displays LLDP configuration information for the switch:
# show lldp
LLDP transmit interval
LLDP transmit hold multiplier
LLDP transmit delay
LLDP SNMP notification interval
LLDP reinitialize delay
LLDP-MED fast start repeat count : 4
LLDP Port Configuration:
Port Rx
Mode
============================================================================
1:1 Enabled
1:2 Enabled
7:1 Enabled
============================================================================
Notification: (L) lldpRemTablesChange, (M) lldpXMedTopologyChangeDetected
LLDP Flags
498
Specifies all ports on the switch.
Specifies one or more ports or slots and ports.
Shows information on the configured VLANs on the port.
Tx SNMP
Mode Notification
Enabled --
Enabled L-
Enabled LM
: (P) Port Description, (N) System Name, (D) System Description
(C) System Capabilities, (M) Mgmt Address
: 30 seconds
: 4 (used TTL = 120 seconds)
: 2 seconds
: 5 seconds
: 2 seconds
Optional enabled transmit TLVs
LLDP 802.1
--D-- ---
--D-- ---
--D-- ---
ExtremeWare XOS 11.5 Command Reference Guide
keyword to
detailed
802.3 MED AvEx
---- CLP- ----
---- C-P- ----
---- CLP- ----