Show Cfm Detail - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Connectivity Fault Management

show cfm detail

show cfm {<domain_name> {<association_name> {ports <port_list>} {[end-point
[inward-facing | outward-facing]]}}}} detail
Description
Displays the MEP CCM database.
Syntax Description
domain_name
association_name
port_list
inward-facing
outward-facing
Default
N/A.
Usage Guidelines
If you don't specify any parameters or variables, the system displays information on all CCM databases
on the switch.
This command displays the following items of the CCM database:
The name of the domain and association
●
Port number
●
MP and type
●
MAC address of remote end points
●
MEP IDs
●
Lifetime for CCM messages from each remote end point
●
Actual age of CCM messages
●
NOTE
The TTL for the CCM messages from the MP you are working on is 3.5 times the transmission interval.
448
Enter the name of the domain for which you want to display the MEP CCM
databases.
Enter the name of the association for which you want to display the MEP CCM
databases.
Enter the ports in the domain/association for which you want to display the
CCM databases.
Enter this to display the CCM database on the inward-facing MEP for the
specified MA.
Enter this to display the CCM database on the outward-facing MEP for the
specified MA.
ExtremeWare XOS 11.5 Command Reference Guide