Unconfigure Log Filter - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Status Monitoring and Statistics

unconfigure log filter

unconfigure log filter <filter name>
Description
Resets the log filter to its default values; removes all filter items.
Syntax Description
filter name Specifies the log filter to unconfigure.
Default
N/A.
Usage Guidelines
If the filter name specified is DefaultFilter, this command restores the configuration of DefaultFilter back
to its original settings.
If the filter name specified is not DefaultFilter, this command sets the filter to have no events configured
and therefore, no incidents will pass. This is the configuration of a newly created filter that was not
copied from an existing one.
See the command for information about deleting a filter.
delete log filter
Example
The following command sets the log filter myFilter to stop passing any events:
unconfigure log filter myFilter
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available all platforms.
710
ExtremeWare XOS 11.5 Command Reference Guide