Create Vlan - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

create vlan

create vlan <vlan_name> {vr <vr-name>}
Description
Creates a named VLAN.
Syntax Description
vlan_name
vr
vr-name
Default
A VLAN named Default exists on all new or initialized Extreme switches:
It initially contains all ports on a new or initialized switch, except for the management port(s), if
●
there are any.
It has an 802.1Q tag of 1.
●
The default VLAN is untagged on all ports.
●
It uses protocol filter
●
any
A VLAN named Mgmt exists on switches that have management modules or management ports:
It initially contains the management port(s) the switch.
●
It is assigned the next available internal VLANid as an 802.1Q tag.
●
If you do not specify the virtual router, the VLAN is created in the current virtual router.
Usage Guidelines
A newly-created VLAN has no member ports, is untagged, and uses protocol filter
configure it otherwise. Use the various
needs.
Internal VLANids are assigned automatically using the next available VLANid starting from the high
end (4094) of the range.
Each VLAN name can be up to 32 standard alphanumeric characters, but must begin with an
alphabetical letter. Quotation marks can be used to enclose a VLAN name that does not begin with an
alphabetical character, or that contains a space, comma, or other special character.
ExtremeWare XOS 11.5 Command Reference Guide
Specifies a VLAN name (up to 32 characters).
Specifies a virtual router.
Specifies in which virtual router to create the VLAN.
NOTE: On the BlackDiamond 8800 series switch and the Summit X450 family
of switches, all VLANs are created in VR-Default and cannot be moved.
.
configure vlan
commands to configure the VLAN to your
create vlan
until you
any
757