ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Managing the Switch
show snmpv3 filter
show snmpv3 filter {[[hex <hex_profile_name>] | <profile_name>] {{subtree}
<object_identifier>}
Description
Displays the filters that belong a filter profile.
Syntax Description
hex_profile_name
profile_name
object_identifier
Default
N/A.
Usage Guidelines
Use this command to display entries from the snmpNotifyFilterTable. If you specify a profile name and
subtree, you will display only the entries with that profile name and subtree. If you specify only the
profile name, you will display all entries for that profile name. If you do not specify a profile name,
then all the entries are displayed.
Example
The following command displays the part of filter profile prof1 that includes the MIB subtree 1.3.6.1.4.1:
show snmpv3 filter prof1 subtree 1.3.6.1.4.1
The following is sample output from this command:
Profile Name
Subtree
Mask
Type
Storage Type
Row Status
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_profile_name
218
Specifies the filter profile to display. The value is to be supplied as a colon
separated string of hex octets.
Specifies the filter profile to display in ASCII format.
Specifies a MIB subtree.
: prof1
: 1.3.6.1.4.1
:
: Included
: NonVolatile
: Active
parameter was added in ExtremeWare XOS 11.0.
ExtremeWare XOS 11.5 Command Reference Guide