Create Meter - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
QoS Commands

create meter

create meter <metername>
Description
Creates a meter to limit the rate of packet flow.
Syntax Description
metername Specifies the meter name.
Default
N/A.
Usage Guidelines
When using meters with ACLs, the meter created with this command is associated with an ACL by
specifying the meter name in the action modifier field of the ACL entry. The deny keyword should not
be an action for the ACL, or the packet will be dropped regardless of the metering state.
Example
The following command creates the meter maximum_bandwidth:
create meter maximum_bandwidth
History
This command was available in ExtremeWare XOS 11.1.
Platform Availability
This command is available only on the BlackDiamond 8800 series switch, the Summit X450 family of
switches, and the BlackDiamond 12804 R-Series switch.
900
ExtremeWare XOS 11.5 Command Reference Guide