Show Log - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Status Monitoring and Statistics

show log

show log {messages [memory-buffer | nvram]} {events {<event-condition> |
<event-component>]} {<severity> {only}} {starting [date <date> time <time>
| date <date> | time <time>]} {ending [date <date> time <time> | date
<date> | time <time>]} {match <regex>} {chronological}
Description
Displays the current log messages.
Syntax Description
messages
memory-buffer
nvram
events
event-condition
event-component
severity
only
starting
date
time
ending
regex
chronological
Default
The following defaults apply:
messages—memory buffer
●
event—no restriction (displays user-specified event)
●
severity—none (displays everything stored in the target)
●
starting, ending—if not specified, no timestamp restriction
●
match—no restriction
●
chronological—if not specified, show messages in order from newest to oldest
●
668
Specifies the target location from which to display the log messages.
Show messages stored in volatile memory (default).
Show messages stored in NVRAM.
Show event messages.
Specifies the event condition to display.
Specifies the event component to display.
Specifies the minimum severity level to display (if the keyword only is
omitted).
Specifies that only the specified severity level is to be displayed
Show messages with timestamps equal to or greater than that specified
Specifies the date, where date is <month (1-12)> / <day (1-31)> {/ <year
(yyyy)>}.
Specifies the time, where time is <hour (0-23)> {: <minute (0-59)> {:
<seconds (0-59)> {. <hundredths>}}}
Show messages with timestamps equal to or less than that specified.
Specifies a regular expression. Only messages that match the regular
expression will be displayed.
Specifies displaying log messages in ascending chronological order (oldest to
newest).
ExtremeWare XOS 11.5 Command Reference Guide