Configure Inline-Power Label Ports - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Power Over Ethernet Commands

configure inline-power label ports

configure inline-power label <string> ports <port_list>
Description
Lets you create your own label for a specified PoE port or group of PoE ports.
Syntax Description
string
port_list
Default
No label.
Usage Guidelines
Use the show inline-power configuration ports
display inline power configuration information, including the label (if any) for each port:
show inline-power configuration port 3:1-10
Following is sample output from this command:
Port Config
3:1 Enabled
3:2 Enabled
3:3 Enabled
3:4 Enabled
3:5 Enabled
3:6 Enabled
3:7 Enabled
3:8 Enabled
3:9 Enabled
3:10 Enabled
Example
The following command assigns the name "alpha-test_1" to port 1 on slot 4:
config inline-power label alpha-test_1 ports 4:1
History
This command was first available in ExtremeWare XOS 11.1.
514
Specifies a name up to 15 characters in length to identify the specified power
port(s).
Specifies one or more ports or slots and ports.
Operator Limit Priority
16000 mW Low
15000 mW Low
15000 mW Low
15000 mW Low
15000 mW Low
15000 mW Low
15000 mW Low
15000 mW Low
15000 mW Low
15000 mW Low
command, as shown in the following example, to
Label
finance
finance
marketing
marketing
marketing
ExtremeWare XOS 11.5 Command Reference Guide