Configure Snmpv3 Delete Group User - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5
Hide thumbs Also See for ExtremeWare XOS:
Table of Contents

Advertisement

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure snmpv3 delete group user

configure snmpv3 delete group
user [all-non-defaults | {[[hex <hex_user_name>] | <user_name>] {sec-model
[snmpv1|snmpv2c|usm]}}]
Description
Deletes a user name (security name) from a group.
Syntax Description
hex_group_name
group_name
all-non-defaults
hex_user_name
user_name
sec-model
snmpv1
snmpv2c
usm
Default
The default value for sec-model is USM.
Usage Guidelines
Use this command to remove the associate of a user name with a group.
As per the SNMPv3 RFC, a security name is model independent while a username is model dependent.
For simplicity, both are assumed to be same here. User names and security names are handled the same.
In other words, if a user is created with the user name username, the security name value is the same,
username.
Every group is uniquely identified by a security name and security model. So the same security name
can be associated to a group name but with different security models.
The default groups are: admin, initial, v1v2c_ro, v1v2c_rw.
The default users are: admin, initial, initialmd5, initialsha, initialmd5Priv, initialshaPriv.
ExtremeWare XOS 11.5 Command Reference Guide
{[[hex <hex_group_name>] | <group_name>]}
Specifies the group name to delete or modify. The value is to be supplied as a
colon separated string of hex octets.
Specifies the group name to delete or modify in ASCII format.
Specifies that all non-default (non-permanent) users are to be deleted from the
group.
Specifies the user name to delete or modify. The value is to be supplied as a
colon separated string of hex octets.
Specifies the user name to delete or modify in ASCII format.
Specifies the security model to use.
Specifies the SNMPv1 security model.
Specifies the SNMPv2c security model.
Specifies the SNMPv3 User-based Security Model (USM).
configure snmpv3 delete group user
153

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware xos 11.5

Table of Contents