Disable Dot1P Examination Ports - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

disable dot1p examination ports

disable dot1p examination ports [<port_list> | all]
Description
Prevents examination of the 802.1p priority field as part of the QoS configuration.
Syntax Description
port_list
all
Default
Enabled.
Usage Guidelines
The 802.1p examination feature is enabled by default. Once you disable 802.1p examination, the system
releases ACL resources; if you re-enable this feature, those ACL resources are once again unavailable.
See ExtremeWare XOS Concepts Guide for information on available ACLs on these platforms.
Extreme Networks recommends disabling this feature when you are not using this form of traffic
grouping to free resources.
Example
The following command disables 802.1p value examination on ports 1 to 5:
disable dot1p examination ports 1-5
History
This command was available in ExtremeWare XOS 11.4.
Platform Availability
This command is available only on the BlackDiamond 8800 series switch and the Summit X450 family of
switches.
ExtremeWare XOS 11.5 Command Reference Guide
Specifies a list of ports or slots and ports.
Specifies that dot1p replacement should be disabled for all ports.
disable dot1p examination ports
913