Show Traffic Queue Statistics - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
QoS Commands

show traffic queue statistics

show traffic queue [port <port_list> | <queue_name>] statistics
Description
Displays packets passed and dropped in high, medium, and low portion of each HQoS traffic queue
and by port, if desired.
Syntax Description
port_list
queue_name
Default
N/A.
Usage Guidelines
Allows you to view the number of packets dropped and passed in each part of the HQoS strict priority
queues: high, medium, or low.
If you issue the command,
calculates uses that byte size to calculate the statistics. If you use this command to decrease by 4, the
output of the
show traffic queue statistics
displayed as 0.
Displays the following information:
Name of traffic queue
●
Direction of queue
●
Priority (high, medium, low)
●
Packets passed
●
Bytes passed
●
Packets dropped
●
Bytes dropped
●
You can also display this information by port.
Example
The following command displays the rate limiting statistics for the specified port:
show traffic queue port 6:2 statistics
936
Enter the ports for which you want to display the rate limiting statistics.
Enter the name of the traffic queue for which you want to display the rate
limiting statistics.
configure ports rate-limit packet byte-adjustment
command displays only bytes; the packets are
, the system
ExtremeWare XOS 11.5 Command Reference Guide