Delete Traffic Queue - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
QoS Commands

delete traffic queue

delete traffic queue <queue_name>
Description
Deletes the specified traffic queue and removes all ingress-only and ingress and egress HQoS rate
limiting resources associated with this queue from the hardware. This command does not delete any
associated meters, which remain available for use with other traffic queues.
Syntax Description
queue_name Specifies the traffic queue you are deleting.
Default
N/A.
Usage Guidelines
Prior to deleting an HQoS traffic queue, you must remove all ACL policy file associations; you cannot
delete a traffic queue that is currently associated with one or more ACL policy files.
When you delete an ingress traffic queue associated with an egress traffic queue, the associated egress
traffic queue remains.
Once you have associated an egress queue to an ingress queue, you cannot delete the egress queue; the
system returns an error message. However, prior to associating the egress queue with the ingress queue
(see command), you can delete the egress
configure traffic ingress queue add egress queue
queue.
When you delete any type of traffic queue, the associated meters are not deleted. Rather, those meters
remain and can be associated with other traffic queues. To display the configured meters, issue the
show
command.
meters
Example
The following command deletes the test strict priority traffic queue:
delete traffic queue test
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available only on the BlackDiamond 12804 R-Series switch.
910
ExtremeWare XOS 11.5 Command Reference Guide