Extreme Networks ExtremeWare XOS Command Reference Manual page 256

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Managing the ExtremeWare XOS Software
By making a copy of a core dump file, you can easily compare new debug information with the old file
if needed.
If you configure and enable the switch to send core dump (debug) information to the internal memory
card, specify the
existing core dump file. If you have a modular switch with an external compact clash memory card
installed, you can copy the core dump file to that card.
For information about configuring and sending core dump information to the internal memory card, see
the
configure debug core-dumps
For more detailed information about core dump files, see
ExtremeWare XOS Concepts Guide.
Modular Switches Only. This command also replicates the action from the primary MSM to the backup
MSM. For example, if you copy a file on the primary MSM, the same file is copied to the backup MSM.
For the
memorycard
memory card for this operation to succeed. The
external memory card or a file already on the card. If you copy a file from the switch to the external
memory card, and the new filename is identical to the source file, you do not need to re-enter the
filename.
If you send core dump information to the external memory card, specify the
associated memorycard name options to copy an existing core dump file. For more information about
core dump files, see
Example
The following command makes a copy of a configuration file named test.cfg and gives the copied file a
new name of test_rev2.cfg:
cp test.cfg test_rev2.cfg
The following command makes a copy of a configuration file named primary.cfg from a modular switch
to the external memory card with the same name, primary.cfg:
cp primary.cfg memorycard
The above command performs the same action as entering the following command:
cp primary.cfg memorycard primary.cfg
History
This command was first available in ExtremeWare XOS 11.0.
The
memorycard
The
internal-memory
Platform Availability
This command is available on all platforms.
256
option and associated internal-memory name options to copy an
internal-memory
and save debug tracefiles memorycard
option, the source and/or destination is the memorycard. You must mount the
"Internal Memory and Core Dump Files" on page
option was added in ExtremeWare XOS 11.1.
option was added in ExtremeWare XOS 11.4.
Appendix B, "Troubleshooting,"
command copies a file from the switch to the
cp
255.
ExtremeWare XOS 11.5 Command Reference Guide
commands.
in the
option and
memorycard