ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
(P) EAPS protected vlan, (r) RIP Enabled, (T) Member of STP Domain,
(v) VRRP Enabled, (B) 802.1ah Backbone VMAN, (S) 802.1ah Service VMAN
Total number of bvlan(s) : 1
The following is an example of the display from the
BVLAN Interface with name test created by user
Admin State:
Priority:
Virtual router: VR-Default
IPv6:
STPD:
Protocol:
Loopback:
NetLogin:
QosProfile:
Dot1ah Mode:
Service Count:
Ports:
0.
The display from the
show bvlan detail
command, but displays information for all configured BVLANs.
bvlan <bvlan_name>
Displaying EtherTypes. The following is an example of the display from the
command when you configure MAC-in-MAC tunnels:
BlackDiamond 12804.41 # show vman etherType
vman EtherType : 0x88a8
bvlan EtherType: 0x88b5
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available only on the BlackDiamond 10808 and 12804 switches.
ExtremeWare XOS 11.5 Command Reference Guide
show bvlan <bvlan_name>
Enabled
Tagging:Untagged (Internal tag 4091)
802.1P Priority 0
None
None
Match all unfiltered protocols
Disabled
Disabled
QP1
Backbone
0
(Number of active ports=0)
command shows all the information shown in the
show bvlan
command:
show
show vman etherType
775