Configure Cfm Domain Add Association Integer - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Connectivity Fault Management

configure cfm domain add association integer

configure cfm domain <domain_name> add association integer <int> vlan
<vlan_name>
Description
Creates a maintenance association (MA) related to a specified maintenance domain (MD). This
command supports the 2-octet integer MA format.
Syntax Description
domain_name
int
vlan_name
Default
N/A.
Usage Guidelines
All ports configured on the specified VLAN are now CFM ports in the specified MA. Each VLAN can
be associated with a single association, or MA.
You add the MA, or association, to the domain, and the MA uses the MA level assigned to the domain.
Each MA can belong to only one domain, but several MAs can belong to a given domain. The MA is
unique within a given domain.
Example
The following command creates a 2-octet integer MA (350) that associates the domain brazil and the
VLAN admin:
configure cfm domain brazil add association integer 350 vlan admin
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available only on the BlackDiamond 10808 and 12804 switches.
416
Specifies the domain you want to associate with this MA.
Enter an integer to name the MA. The range is between 0 and 65535.
Specifies the VLAN you want to assign to this MA. Each VLAN belongs to only
one MA, and each MA contains only one VLAN.
ExtremeWare XOS 11.5 Command Reference Guide