Configure Syslog Add - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure syslog add

configure syslog {add} [<ipaddress> | <ipPort>] {vr <vr_name>} [local0 ...
local7] {<severity>}
Description
Configures the remote syslog server host address, and filters messages to be sent to the remote syslog
target.
Syntax Description
ipaddress
ipPort
vr_name
local0 ... local7
severity
Default
If a severity level is not specified, all messages are sent to the remote syslog server target. If a virtual
router is not specified, VR-Mgmt is used. If UDP port is not specified, 514 is used.
Usage Guidelines
NOTE
The BlackDiamond 8800 series switch and the Summit X450 family of switches do not support user-created VRs.
Options for configuring the remote syslog server include:
ipaddress—The IP address of the remote syslog server host.
●
ipPort—The UDP port.
●
local0-local7—The syslog facility level for local use.
●
vr_name—The virtual router that can reach the syslog host.
●
severity—Filters the messages sent to the remote syslog server target to have the selected severity or
●
higher (more critical). Severities include critical, error, warning, notice, info, debug-summary, debug-
verbose, and debug-data.
The switch log overwrites existing log messages in a wrap-around memory buffer, which may cause
you to lose valuable information once the buffer becomes full. The remote syslog server does not
overwrite log information, and can store messages in non-volatile files (disks, for example).
ExtremeWare XOS 11.5 Command Reference Guide
Specifies the remote syslog server IP address.
Specifies the UDP port number for the syslog target.
Specifies the virtual router that can reach the server IP address.
NOTE: The BlackDiamond 8800 series switch and the Summit X450 family of
switches do not support user-created VRs.
Specifies the local syslog facility.
Specifies a message severity. Severities include critical, error, warning, notice,
info, debug-summary, debug-verbose, and debug-data.
configure syslog add
619