Extreme Networks ExtremeWare XOS Command Reference Manual page 885

Software version 11.5

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

Unicast Flooding:

Multicast Flooding:

Broadcast Flooding:

Enabled, MTU= 9216

High Priority COS: 7

Packet Length Adjustment: 0 bytes

QoS Profile:

Aggregate Queue:

Ingress Rate Shaping :

Ingress IPTOS Examination:

Egress IPTOS Replacement:

Egress 802.1p Replacement:

NetLogin port mode:

Smart redundancy:

Software redundant port:

Preferred medium:

The following command instructs the system to subtract 4 bytes from all packets ingressing ports 2:1 to

2:10 when calculating ingressing traffic rates, traffic utilization, and traffic statistics:

configure ports 2:1-10 rate-limit packet byte-adjustment decrease 4

This command was first available in ExtremeWare XOS 11.4.

Platform Availability

The basic command is available only on the BlackDiamond 12804 R-Series switch.

ExtremeWare XOS 11.5 Command Reference Guide

Name: vman110

Load sharing is not enabled.

None configured

configure ports rate-limit packet byte-adjustment

Protocol: ANY

Port based VLANs

Match all protocols.

Extremeware xos 11.5