Security Licensing; Understanding The Command Syntax - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
The BlackDiamond 10808 Switch Only
The licensing levels on the BlackDiamond 10808 switch depend on the MSM you have in your system:
The MSM 1 ships with a Core license; you cannot upgrade to an Advanced Core license.
●
The MSM 1XL ships with an Advanced Core license.
●
NOTE
Beginning with ExtremeWare XOS version 11.2, you can run BGP with a Core license on the BlackDiamond 10808
switch; that is both the MSM1 and the MSM1XL now run BGP.
The BlackDiamond 12804 Switch Only
Both the MSM-5 and the MSM-5R ship with a Core license, and the Advanced Core license is not
available for this switch.
NOTE
Beginning with ExtremeWare XOS version 11.2, you can run BGP with a Core license.
Enabling and Displaying Licenses
To enable the license, use the following command:
enable license <key>
To display the current license level (as well as enabled feature packs), use the following command:
show licenses

Security Licensing

Certain additional ExtremeWare XOS features, such as the use of SSH2 encryption, may be under
United States export restriction control. Extreme Networks ships these security features in a disabled
state. You can obtain information on enabling these features at no charge from Extreme Networks.

Understanding the Command Syntax

This section covers the following topics:
Access Levels on page 40
●
Syntax Symbols on page 40
●
Command Completion with Syntax Helper on page 40
●
Names on page 41
●
Command Shortcuts on page 41
●
ExtremeWare XOS 11.5 Command Reference Guide
Understanding the Command Syntax
39